Mecca Wall Mount DDA Sensor Tap 80mm Plate Matte Black - NR405MB

• WELS Rating: 6L/Min, 6Star
• WELS Registration No: T42684
• Material: Brass

Install Advice:

Water Connect Installation Instruction:

1. Water outlet hose connect

-Connect the spout with control box by flexible hose.

2. Water inlet hose connect

-Connect G1/2 water supply hose with water inlet.

Note: Be sure no water leakage after connecting water.

Signal Line Connect Installation Instruction:

Connect signal line with control box, then screw tightly.

Note: Should keep the signal line clear and dry, be sure to work normally.

Control Box Installation Instruction:

1. Put the control box on wall, drill four holes, then insert the plastic bulged tube.

2. Fix the control box in wall by screw.

Note:

1. Please close the water supply and power supply before install.

2. Be sure to install control box correct, don't put upside down.

3. For easy to maintain, should be choose the suitable place install control box. Meanwhile, it must less than 50cm distant from the basin.

Power Connect Installation Instruction:

AC: Connect the transformer

DC: Put in 4AA Alkaline battery into the battery box.

Clean Sensor Window:

After installation, wipe sensor window by soft dry cloth to keep it clean.

Detect Distance:

ATTENTION: After installation, please remember to hold down the red reset button for 2 seconds to enable sensor to learn the IR distance to sink.

Note: It is normal if there is sound of opening & closing solenoid valve when it is under self-adjustment condition.