Nero Claudia Sensor Mixer with White Top Display Chrome - NR222102CH

Nero features bathroom products that are trend setting and industry leading in quality. Their products feature the latest technology in PVD coating which provides a consistent and durable finish to the product. Nero confidently offers a minimum of a 10 year replacement warrantee for all of their PVD finishes.

The Claudia is a high- end mixer tap that features the latest in sensor technology. The design features a Mixer Control function, Led temperature display and 6 different material finishes.

More suited to DDA use than standard sensor mixers as the Claudia mixer has 2 sensors, a regular sensor at the front of the spout that is much easier for wheelchair users to reach and activate and a top touch sensor which works as an on off button for those with less hand control.

Nero Claudia Sensor Mixer with White Top Display features:

• Brass construction for longevity
• Hands free operation for hygiene life
• Super fast sensing control
• Temperature display and control
• Touch control mode
• Ultra low power consumption
• 6 different finishes and 2 different face-plate
• Two sensors top and front for easy on off control
• Sensor is located at the spout making it much easier for wheelchair/seated users to activate
• Temperature shown on top LED screen
• AS1428.1 compliant
• WELS Rating: 5.0 L/Min, 6 Star
• WELS Registration No: T40943
• Material: Brass
  

More options available, see Avail or Nero’s website

Install Advice:

Installation Instruction:

1. Prior to installing this faucet, please confirm whether the 4 AA alkaline batteries conform to national standard, and fix them into the battery box correctly according to the positive and negative poles.

2. Drill two appropriate size holes with a distance of 54mm on the bottom of the basin. The two holes recommended to be more than 250mm height.
Knock the colloidal expand particles into the holes and lock the battery box bracket (at the bottom of the battery box to the wall with the tapping screw)

3. Take out the battery bracket. Then fix batteries correctly and put on the cover.

4. Connect the round cable plug of the battery box with the round cable plug of the faucet. Insert the battery box into the bracket. Lock the G1 /2connector of the red braided network pipe (hot) to the outlet thread of the hot water angle valve, and connect and lock the G1 /2 connector of the blue braided network
pipe (cold) to the outlet thread of the cold water angle valve.

Note: After installation, 0.9MPa/60s clean water pressure test shall be carried out. It can be used only after confirming that all pipelines have no drip and water leakage.