Calibre Mecca 25mm Grab Rail Make Your Own Double Towel Bracket Right Chrome (Available Early March) - NR5390422CH

• Double Towel Grab Rail End Bracket for 25mm Diameter Grab rails
• Right hand bracket
• Create custom length Double Towel Grab Rails up to 1200mm
• The ends of the rails slot into the brackets and are secured with from underneath the bracket
• 150kg Capacity when installed correctly
• Includes Mounting Bracket set with screws and wall plugs
• Formerly product code: NRE1BTDRCH

Install Advice:

Installation Instruction:

1. Unscrew the grub screw and remove the mounting bracket. Then loosen or remove the grub screws from the towel bracket.

2. Drill a 10mm diameter mounting hole in the wall where the towel bracket is to be installed.

3. Secure the mounting bracket to the wall using the expansion plug, the washer and the self-tapping screw.

4. Insert the grab rails fully into the towel bracket, then tighten the grub screws to secure the grab rails in place.

5. Insert the towel bracket into the mounting bracket, then tighten the grub screw to secure it.