Calibre Mecca Heavy Duty Toilet Roll Holder Brushed Gold - NRCR3286BG

• 150kg capacity when installed into a supported wall subtle strong point for the toilet
• Holder can be mounted facing left or right
• Material: Stainless Steel
• Australian Owned and Designed
• Provides a helping hand and a handy toilet roll holder
• Available in over 7 finishes including Living Brass, Chrome, Matt Black, Gunmetal, Brushed Nickel, Bronze, Gold

Install Advice:

Installation Instruction:

1. Locate wall studs, install into at least one stud.
Place wall seal/mounting bracket on wall at correct height over centre of stud and mark hole positions on wall, at least 3 holes. (3 supplied screws for bracket).

2. Drill pilot holes into wall stud approximately 60mm deep to suit mounting screws (and wall plugs if required).
Tip:3mm hole for screws into timber or 8mm hole for wall plugs.

3. Apply small amount of silicon to mounting bracket and wall in and around the screw holes.

4. Install mounting brackets by screwing onto wall.
Tip: Use appropriate mounting screws for the wall stud material, supplied screws are for timber wall studs.

5. Push roll holder onto wall brackets.
Tip: The direction can be changed from left to right
during installation.

6. Tighten grub screws with allen key.

7. Finished.