Care Kitchen Sink Single Bowl - With Heat Shield Pad - BEN-A832-425SB

• Designed and manufactured with input + assistance from people involved with SDA and affiliated specialists, and with all models crafted to comply with their standards as well as AS1428.1, you can use with confidence these products.
• Mirror Finish Stainless Steel
• Single Bowl Top mount Sink
• 150mm Shallow Bowl Depth
• Single Tap Hole Standard*
• 5 Years Limited Manufacturers Warranty
• 1 Year Limited Commercial Warranty
• Watermark Certified
• Basket Plug and Waste included
• Includes heat pads
• Overall Sink Dimensions 446mm (w) x 392mm (d) x 150mm (h)

Install Advice:

Installation Instruction:

1. Check Space & Level
Ensure you use a level to check the benchtop before you begin installation.

2. Mark Cut Out
Cautiously mark out sink template. Remove sink from benchtop and mark line 15mm inside sink outline

3. Cut Sink Hole
Double check cut out drawing and position. Drill pilot holes and have appropriate cutting tool for benchtop ready.

4. Trial Fit Your Sink
Carefully position the sink into the cut out to ensure it fits correctly.

5. Masking
If using sealant, masking is essential. We recommend that the edge of sink and edge of cut out are covered with appropriate masking tape.

6. Add Sealant
Apply sealant caulking compound around the join where the benchtop and sink meet.
Check caulking product is mildew resistant and suitable for stainless steel and use on benchtop material.
Wipe away any excess before it dries.

7. Fit Your Sink
Position and align sink correctly into cut and lower onto benchtop.
Insert the clips into the rails and lightly tighten.
Tighten clips from underneath with screw driver one after the other in a clockwise order.
Sink should be secure with no gaps visible. We do not recommend using power tools as over tightening can damage clips.