Liberty Shower Seats
Mecca Care Shower Seat 400x330mm Brushed Bronze - NRCR0003BZ
brushed bronze
...

Need a Quote?
Generate a quote for this product by adding your email below OR generate a quote based on all items in your cart
Create Quote
- Soft Close Hinges
- Suitable for Ambulant and private showers
- The wall bracket cover is available in different finishes
- 150kg Capacity
- Material: ABS
- Suitable for private homes and assisted living bathrooms in aged care, retirement villages etc.
- A stylish design to help prevent falls in the bathroom and live independently
- High quality materials and finishes





Description
- Soft Close Hinges
- Suitable for Ambulant and private showers
- The wall bracket cover is available in different finishes
- 150kg Capacity
- Material: ABS
- Suitable for private homes and assisted living bathrooms in aged care, retirement villages etc.
- A stylish design to help prevent falls in the bathroom and live independently
- High quality materials and finishes
Install Advice:
Installation Instruction:
1. Before the installation, Ensure the wall is suitable for installing the shower seat. Place the wall fixing plate on the wall in the correct position and proceed to mark out the holes.
Tips: It is recommended to have the height from the floor to the top of the seat at 470-480mm. Additionally, it is suggested to have the height from the floor to the wall fixing plate at 453-463mm.
2. Drill 6 holes on the wall, aligning them with the screw holes of our shower seat (using a 10mm drill bit
and ensuring a hole depth of 6.5cm). Apply silicone to each hole and firmly insert the Nylon wall plug into the wall using a hammer.
3. Place the shower seat against the wall, ensuring that the screw holes are aligned with the corresponding wall holes, and proceed to securely fasten them using a socket wrench.
4. Tightly secure the base cover.
5. Check the function and fold up the seat when not in use.
*Note: The drilling bit is 10mm, and the drilling depth is greater than or equal to 6.5cm